How does your web browser know where to go
The Internet can be a mind-boggling thing. When you type a web address into your browser you soon find yourself connected to another computer that could be anywhere. It's quite amazing to consider that the page you are reading is hosted somewhere in The United States, Denmark, Swaziland, or Brazil. Have you ever wondered how your browser is able to find web sites hosted in far off corners of the world?
What follows is a brief and simplified explanation. The processes can get complex, and there are lots of different ways to achieve the same result, so I'll keep it simple and general.
Dialing Into Actrix
Before you can access the Internet through Actrix Networks your modem and Actrix's modem have to understand each other.
Step One occurs when you dial in to Actrix. The Actrix modem and yours squeal at each other for a few seconds in order to make sure they understand each other, and can agree on how to communicate. At the point where they go silent, the Actrix modem is instructing your computer as to where various pathways to information are. Your dial up networking program is given this information each time you connect and remembers it for the duration of your online session.
We need to pause for a second or two here in order to be sure we understand what IP addresses are. Humans like names and words. If we want a site, we like to type in an address we can relate to such as www.actrix.co.nz or www.yahoo.com. Computers don't like words. They would rather deal with numbers. So, every web address has an IP (Internet Protocol) address behind it. For example, the IP address for Actrix is 22.214.171.124. The IP address for Yahoo is 126.96.36.199. Try typing these numbers into your browser (without the full-stops at the end) and they will bring up the required pages just as easily as the web addresses do. An IP address consists of a set of four numbers, each separated by a "dot" or full-stop. Each time you connect to the Internet, Actrix assigns your machine with an IP address too. Every machine connected to the Internet has to have one. If you'd like to learn a little more about how IP addresses work, you could try this article written by Dean Moor for the September 2000 newsletter: http://editor.actrix.gen.nz/byarticle/hacking01.htm.
Connecting to the Actrix Name Server
One of the most important things your computer is told when you connect is where to find the Actrix name server. Every ISP has two or more name servers that hold lists of web addresses (such as www.yahoo.com) and their corresponding IP addresses (such as 188.8.131.52). When you type www.yahoo.com into your browser and hit enter, your computer immediately connects to the Actrix name server and asks it for the IP address that corresponds to www.yahoo.com. If the Actrix name server knows, it gives you back "184.108.40.206" right away. If it doesn't know, it asks another server for the answer. If that server doesn't know, it asks another one until one name server pops up that knows the answer. The answer is then passed back down the line and given to your computer. All this usually takes just milliseconds. Servers are smart enough so that they usually don't have to ask another server at random. The server will examine your request for a clue as to what would be the best server to ask next. If the web address you wanted ended in ".com.au" for example, the name server would at least recognise that as an Australian address, and therefore it would ask for help from an Australian name server it knows.
Connecting to the Actrix Terminal Server
Okay, so you've typed an address into your browser. Your computer has asked the Actrix name server for the IP address of that site and the Actrix name server has given it to you (possibly needing to ask a series of name servers around the world first). This all happens in a matter of seconds. Another important thing that happens while you are connecting to Actrix, is that your computer is connected to the Actrix terminal server. The terminal server is the one that knows the pathways to sites around the world, or who can find them out for you. Your computer gives the terminal server the IP address it wants. If you typed www.yahoo.com into your browser, then you'll be giving the Actrix terminal server the IP address 220.127.116.11.
Two things could happen here. If the Terminal server knows the pathway to the site with the IP address you have requested, it will simply set off and download the page so that it can "serve" it to your computer for browser display. This may involve hops through up to a dozen or more computers or servers around the world between you and the server which hosts the page you want. If the site is reasonably local, the terminal server will almost certainly know where to find it.
However, if the site is far away, or if for any other reason the Actrix terminal server does not know the path to the site you have requested, then it will pass you through its "default gateway" to a router which it hopes will know the way. This router will look through its enormous "routing table" to try and find the path to the requested site. If it finds the right path, it will pass you on to the next computer in line. If it can't find the site anywhere in its routing tables, it will pass you on to another router. This process will go on until one of the routers, somewhere in the world, finds the needed site in its routing table. That router will then send your request off along the right path. Again, this seems like it should take ages, but it all occurs within milliseconds.
As your request travels ("hops") from computer to computer across the Internet, a record is kept along the way of who you are (your IP address) and where you came from. When your request finally reaches the destination site, the web server there will "serve you" the page by sending it back to you across pretty much the same path you took to get there. Knowing this helps one understand just how much the Internet is a co-operative system. Public and private Servers all around the world, even from rival companies within the same country, are working together to make it all possible.
So that's it in a very simple nutshell. Of course I missed out or glossed over a whole lot of complicated stuff, but this should be enough to give you a rough idea of what is happening behind the scenes when you're surfing the net. If you'd like to find out more, you may be interested in another "layman's terms" article from the May 2000 Newsletter entitled "What Happens When I Click Connect?"